|
Material:
|
Aluminium alloy to BS
EN573 6063 T6
Marston Heat Sinks may be ordered in any
length up to 2000mm.
|
|
Dimensions:
|
Tolerance on length:
+/- 0.5mm on up to 300mm
+/- 1 .0mm on 300 to 600mm
Other tolerances: in accordance with
BS EN 12020
|
|
Surface
Finish:
|
Marston Heat sinks can
be supplied in any of the following finishes.
|
Finish
No.
|
Description
|
|
1
|
Plain
|
|
2
|
Matt
black anodised
|
Coloured and clear anodised and painted
finishes are also available. |
|
Hole Patterns:
|
Marston Heat Sinks can
be supplied with standard hole patterns
for most popular devices. Details of
the many available patterns are shown
elsewhere in this brochure.
Non-standard hole patterns can also
be provided.
|
|
Installation
Notches:
|
Flanged Heat Sinks can
be provided with fixing points in the
form of standard notches (6.4 x 6.4mm),
as follows:
- in lengths from 25mm to 75mm: one
notch per flange, equidistant from each
end.
- in longer lengths up to l50mm: three
notches per flange at a pitch of 38mm,
equidistant from each end.
|
